4
Tip: during assembly
place unit onto a work
surface with a clean cover
D = x24
Nail
5
E = x16
Shelf Bracket
Страница 1: ... humidity during transit may result in a powder residue forming so silica gel bags have been included to alleviate this natural occurrence This residue is harmless and can easily be removed before assembly with a damp cloth and mild detergent After care Wipe the surfaces with a dry cloth and an occasional use of normal household polish We also recommend you use household spray polish occasionally ...
Страница 2: ...1 Tip during assembly place unit onto a work surface with a clean cover A x16 Small Dowel 2 C x6 40mm Screw 3 C x5 40mm Screw ...
Страница 3: ...4 Tip during assembly place unit onto a work surface with a clean cover D x24 Nail 5 E x16 Shelf Bracket ...
Страница 4: ... of the furniture top using a 2mm drill bit Attach the other end of the fixing strip to the back edge of the furniture top using the 15mm screw washer and securely tighten Place fixing strip against the wall and mark position for drilling hole Drill hole in your wall to a depth of 30mm using a 6mm drill bit If the surface of your wall is soft and crumbly we would advise you to use a 5mm drill bit ...
