AY218
70 min
Thank you for choosing this furniture.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
This furniture range has been carefully crafted from solid wood, MDF and mirrored glass.
Each piece is hand crafted and has unique characteristics in its finish. These are part of the natural character of the furniture itself.
Caring for your furniture.
Extreme temperature can cause slight movements in the wood framework so please avoid placing your furniture close to radiators or other
direct sources of heat. Please avoid exposing your furniture to continued bright sunlight as this can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Always use place mats, coasters or tablecloths to help protect against scratches and accidentally dropped items.
Always use heat resistant mats when placing hot or cold items on to table surfaces.
Do not sit or stand on glass surfaces.
After care.
Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture polish on wood surfaces and a household glass
cleaner on glass surfaces. For furniture with drawers we also recommend you use household spray polish occasionally on the drawer side
grooves and runners as this will aid use. Please do not use detergents or chemicals on your furniture.
Specialist care.
Glass can be marked with continual use by contact with rough surfaced objects or strong coloured fluids. For your safety each mirrored
component is bonded to the base material, in the event of breakage the backing adhesive is designed to ensure the majority of shards
remain in place but please take extreme care to ensure any small shards are cleared away and the affected part covered in adhesive tape
to retain any further splinters. In the unlikely event that the glass is damaged it must be replaced without delay.
Please consult a specialist glass retailer for this.
A = x42
Dowel
B = x30
40mm Screw
C = x48
25mm Screw
D = x16
Nail
E = x2
Large Screw
F= x3 (+3)
Knob
H = x3
G = x3
Rubber washer
Bolt
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and fittings as detailed on the assembly instructions.
FOR DAMAGED/REPLACEMENT PARTS
Batch Number:
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY NOTE/RECEIPT FOR FUTURE REFERENCE
BEFORE YOU START ASSEMBLY
please store the carton for 48 hours or more so the contents can acclimatise.
