Page 3
2.
Do not exceed the maximum allowable weight
limit of:
• S-CTx - 350 lbs. / 159 kg.
3.
Care should be used when mounting or
dismounting the equipment. Before mounting or
dismounting, move the pedal on the mounting or
dismounting side to its lowest position and bring
the machine to a complete stop.
4.
This unit is not equipped with a free-wheel. Pedal
speed should be reduced in a controlled manner.
5.
Obtain a medical exam before beginning any
exercise program. If at any time during exercise
you feel faint, dizzy, or experience pain, stop and
consult your physician.
6.
Keep children away.
7.
Do not operate the machine if the motor shroud
is removed or if the power cord is damaged in
any manner. Keep all air openings free from dirt
or any material that would block the flow of air to
the motor.
8.
The safety and integrity of this machine can only
be maintained when the equipment is regularly
examined for damage and wear and repaired.
It is the sole responsibility of the owner of this
equipment to ensure that regular maintenance
is performed. Worn or damaged parts must be
replaced immediately or the equipment removed
from service until the repair is made.
9.
Wear proper exercise clothing and athletic shoes
during a workout. Avoid wearing loose clothing.
Tie back long hair and keep towels away from
the moving parts. Face forward at all times and
never attempt to turn around while the machine is
moving.
10.
Do not over exert yourself during exercise. Stop
exercising if you feel pain or tightness in your
chest, become short of breath or feel faint. If you
feel pain or experience any abnormal symptoms,
stop exercising and consult your health care
provider.
11.
WARNING:
Heart rate monitoring systems
may be inaccurate. Over-exercising may result
in serious injury or death. If you feel faint stop
exercising immediately.
12.
It is the purchaser’s sole responsibility to properly
instruct its end users and supervising personnel
as to the proper operating procedures of all
Startrac equipment.
13.
Caution:
unit is heavy and requires two
people for assembly.
14.
After assembly, a complete visual inspection,
and test of the features and functions of the
assembled unit must be made prior to use.
SAVE THESE INSTRUCTIONS
