Page 4
Required Tools:
•
6mm Allen Key
•
4mm Allen Key
•
#2 Phillips Screwdriver
• 19mm
Open-ended
Wrench
1.
Route the wires through the mast beauty ring
(740-9313-XX), then up and out of the top of the
mast.
2.
Once the wires are routed, insert the mast (718-
6006-XX) into the base frame.
3.
Use a 6mm allen key to fi nish securing the mast
to the base frame using four (4) pieces each of
the M8 counter-bore washer (718-5693) and M8 x
20mm socket head cap screw (730-0889).
4.
Use a 4mm allen key to secure the M8 x 40mm
set screw (740-4593) into the mast.
