CORE AUDIO KARUNA P24 USB/SPDIF converter, reclocker
Core Audio Kft. – Hungary All rights reserved.
19.05.2021.
www.coreaudio.eu
b.,
It won’t connect to the source or MusicServer
Check the USB cable if it’s working fine. (it’s not broken, doesn’t have any damage on it,
plugs are intact.) check if the cables are plugged in correctly and to the correct in and
outputs. Check if the USB/SPIDF converter is connected to electricity and is turned on.
Check if the latest installation driver is installed on your source device and if you have the
xCORE USB 2.0 Audio set as your primary audio device.
c.,
Device doesn’t connect to DAC
Check if USB/SPIDF device is connected to electricity and is turned on. Check the DAC if it is
connected to electricity and is turned on.
Check if S/PDIF is cable if it’s working fine. (it’s not broken, doesn’t have any damage on it,
plugs are intact.)
Check if both of the ends of the S/PDIF cable are correctly connected to their places and
make sure if the directions are correct.
If you use AES/EBU cable make sure if it’s working fine. (it’s not broken, doesn’t have any
damage on it, plugs are intact.)
If you couldn’t find a solution after checking the ones above please contact Core Audio Kft.
service on the product support part of the
www.coreaudio.eu
web page.