5
Set up
•
Do not switch on your CORD subwoofer until all connections are made.
• C
onnect the subwoofer out on your CORD mi-fi, source amplifier or receiver to the
SUB IN DIRECT
on the subwoofer using a single RCA.
•
If your source amplifier does not have a dedicated subwoofer out, connect the line
out to the Line IN
on the subwoofer using a RCA cable, then connect your
speakers directly to the speaker out terminals
on the subwoofer.
•
If your source amplifier does not have a dedicated subwoofer out or a line out, then
connect your speaker out from the source to the high level speaker in terminals
,
then connect your speakers to the speaker terminals
on the subwoofer.
•
Ensure the vent
is not covered or blocked.
•
Connect the AC Power cable to the AC socket
and the AC wall socket.
Switch off the AC Power before connecting or disconnecting any
accessory cables to ensure correct operation.
Basic operation
•
To turn ON or OFF, move the main Power switch
to the ON or OFF position.
•
To operate, turn the Operation switch
to On or Auto. Auto will permit the subwoofer
to enter a standby mode when no signal is received for a prolonged period.
•
To increase the output level, turn the Level control
clockwise. To decrease the
volume turn the Level control counter clockwise. Adjust to remove any distortion.
•
To adjust the subwoofer phase and achieve the optimum sound, select 0º or 180º
on the Phase selector
. Normal setting is 0º.
•
To adjust the crossover point or blend of sound between subwoofers and your other
speakers, adjust the Crossover selector
.
Содержание sub-eight
Страница 1: ...sub eight owners manual ...
Страница 12: ...SUBEIGHT SEP 08 AB ...
