G
as
adjustment
1
2
Injector
Control handle
Tap
Sealing ring
2
1
Remove the pan support, Burner lid and Flame spreader.
Unscrew the injector using a 7mm box spanner and
replace it with the stipulated injector for new gas
supply.
Carefully reassemble the all components.
After injectors are replaced, it is advisable to strongly
tighten
the injector in place.
Adjustment of minimum level of the flame.
Turn the taps down to minimum
.
-
Remove the knob from the tap and place a small
bladed screwdriver in the centre of the tap shaft.
The correct adjustment is obtained when the flame
has a length of about 3 - 4 mm.
- For butane / propane gas, the adjusting screw must
Make
sure that the flame does not go out by
quickly
turning
from maximum flow to minimum
flow. If it does then remove the control knob and
make further adjustments to the gas flow, testing it
again once the
adjustment has been made.
Repeat this process for each one of the gas taps.
be tightly screwed in.
Refit the control knob.
Ŷ7DNHSUHFDXWLRQVRQWKHRSHUDWLRQVDQGDGMXVWPHQWVWREHFDUULHGRXWZKHQ
FRQYHUWLQJIURPRQHJDVWRDQRWKHU
Ŷ$OOZRUNPXVWEHFDUULHGRXWE\DTXDOL¿HGWHFKQLFLDQ
Ŷ%HIRUH\RXEHJLQWXUQRIIWKHJDVDQGHOHFWULFLW\VXSSO\WRWKHDSSOLDQFH
-
Ŷ%HIRUHSODFLQJWKHEXUQHUV
EDFNRQWKHWRSSODFHPDNHVXUH
WKDWWKHLQMHFWRULV QRWEORFNHG
FDUULHGRXWDIWHUJDVFRQYHUVLRQ
VXFKDVVRDSZDWHURUJDV
DTXDOL¿HGWHFKQLFLDQRULQVWDOOHU
KDVWRPDUN³9´RQWKHULJKWJDV
FDWHJRU\
WRPDWFKZLWKWKH
VHWWLQJLQUDWLQJSODWH
5HPRYHWKHSUHYLRXV
VHWWLQJ³9´PDUN
LQWKHHYHQWRIDPDOIXQFWLRQ
FKDQJHWKHZKROHWDS
Ŷ$IXOORSHUDWLRQDOWHVWDQGDWHVW
IRUSRVVLEOHOHDNDJHVPXVWEH
Ŷ$IWHUFRPSOHWLQJFRQYHUVLRQ
GHWHFWRU
Change the injector of the burners.
Ŷ
Do not dismantle the tap shafe:
Содержание CPCGM 5F 5021 N
Страница 1: ...PLACA CRISTAL GAS DE 5 FUEGOS NEGRO CPCGM 5F 5021 N MANUAL DE USARIO ...
Страница 24: ......
Страница 25: ...GAS HOB 5 BURNERS BLACK GLASS CPCGM 5F 5021 N USER MANUAL ...