CORBERO CCFW WC 999 S WD, Инструкция по эксплуатации

Страница: 19 / 22

7
the temperature increase or decrease at a speed of 0.5 seconds/step fastly.When stop
pressing buttons for 3 seconds, flashing stopped, return to "the temperature setting
” state .
The setting temperature effects.
5)When the buttons are under
"unlocked" and "temperature display” condition, press
"
” and"
"at the same time for 3 seconds, can switch Fahrenheit and Celsius
temperature display for the temperature range of the left or the right temperature zone.
6) When the wine cooler is in refrigeration condition, compressor operats,
“ ”light
on,the electromagnetic valve of the corresponding temperature zone is connected,the dc
fan operats. W
hen setting temperature is reached, “ ”light off. The electromagnetic
valve of corresponding temperature regions closed, dc fan delay 5 minutes off.
The dc fan of both left and right temperature region running at the same time in defrost
state.
“ ”light off.
7) Press " " for 4 seconds to display the evaporating temperature of the corresponding
temperature region.
MAINTENANCE AND CLEANING
Automatic Defrosting of the Appliance
There is no need to defrost the chiller, because ice depositing on the inner back wall is
defrosted automatically.
Ice build-up on the inner back wall during the compressor operation will defrost
automatically (when the compressor has cycled off).
Defrost water will drain out passing through the drain outlet in the inner back wall into a
drain pan situated above the compressor, from where it evaporates.
Cleaning the Appliance
Disconnect the power supply before cleaning the appliance.
Do not use coarse or aggressive cleaning agents as you may damage the surface.
Clean the exterior with moist cloth.
Remove the detachable accessories in the interior of the appliance and clean the shelves
with water and liquid detergent. Plastic parts cannot be washed in dishwashers.
Clean the interior of the appliance, except for the lamp holder and lamp with moist cloth,
adding one or two drops of vinegar.
After cleaning, connect the appliance to power supply and reload it.
Switch Off the Appliance When Not In Use
If you do not intend to use the appliance for long periods of time, disconnect the power
supply, take out the contents and defrost and clean the appliance. Leave the door slightly
open.