6.
CLEANING
6.1
DEFROSTING
This appliance does not require defrost as it is specially equipped with Auto-defrost.
6.2
CLEANING THE INTERIOR AND THE EXTERIOR OF THE UNIT
Remove all food, shelves and the door bins. To remove the vegetable crisper, first remove the lower door shelf.
Wipe the inside of the unit with a mild solution of baking soda and water and then rinse with warm water using
a soft sponge or cloth. Wipe completely dry before replacing the shelves and produce bins back in.
Use a damp cloth and soapy water to clean the exterior then wipe. Make sure that the door is closed to avoid
soap getting onto the magnetic door seal or inside the unit.
6.3
CLEANING TIPS
Condensation may appear on the outside of the unit. This may be due to changes in room temperature. Wipe off any moisture
residue. If the problem persists, please contact a qualified technician for assistance.
7.
MAINTENANCE
7.1
CHANGING THE LIGHT
Setting the refrigerator control to off does not turn off the power to the light circuit.
CAUTION: Light bulb may be hot. Lamp parameter: MAX 40W
1)
Unplug the refrigerator.
2)
The bulb is located at the top of the compartment near the opening.
3)
Replace with an appliance bulb of equal or lower wattage.
4)
Plug the refrigerator back in.
7.2
HANDLING / MOVING YOUR UNIT
Hold the unit from its sides or its base when moving it. Under no circumstances should it be lifted by holding the top end or
edges.
The unit’s condenser is located at the bottom of the refrigerator; please be careful. Keep the bottom end dry at all times,
during use, cleaning and handling.
Before moving the unit, make sure that the surface on which it rests is perfectly flat and level and solid enough to hold the
weight of the unit and its contents.
7.3
SERVICING
The unit should be serviced by an authorized technician and only replacement genuine spare parts should be used. Under no
circumstance should you attempt to repair the unit yourself. Repairs carried out by unauthorized personnel may result in injury
and will void the warranty. Contact a qualified technician.
7.4
SWITCHING OFF UNIT FOR LONG PERIODS OF TIME
When the unit is not in use for a long period of time, disconnect it from the main source of power supply, empty out its contents
and clean it. Leave the door ajar allowing it to air out this will help prevent odor and mildew.
32