3
2
a:
Check that the enclosure is perfectly vertical and sits evenly on the tray. Drill inside using a 3mm drill bit in the positions shown. Fix using
10mm screws and screw caps.
b:
Check that the enclosure is vertical, drill the remaining holes shown and fix using 10mm screws and screw caps.
See door instructions for door adjustment.
INLINE WITH SIDE PANEL
INLINE ONLY
a
b
b
a
10mm
ø 3
mm
10mm
ø 3
mm
IMPORTANT:
You must ensure that your door is square in its frame and opens and closes correctly when you fit it in the in-line panel.
This should be checked before each set of fixing holes are drilled (see door instructions).
