COQPIT Karbones, Руководство пользователя и инструкции по безопасности

Страница: 20 / 32

20
•
Tightly screw the high pressure hose to the compressor air outlet located between
the pressure gauge and the bleed screw. Check that all bolts and screws are properly
tightened to avoid micro air leaks. Pull the female plug of the cartridge on the hose then
insert the male plug of the tank regulator («click» = good connection)
•
Turn on the compressor by pressing the red switch.
•
Power up the compressor by keeping the switch ON.
•
When turning on the power, make sure water flows from the outlet of the water pump
hose into the water bottle.
•
The compressor temperature must not exceed 80°C.
•
When its temperature approaches that value, turn it off by keeping the switch OFF.
•
Wait for the compressor to cool down before continuing to fill the tank.
•
Do not hesitate to change the water in your bucket if it is too hot.
• The oil introduced must be the one originally supplied or purchased from our
website www.karbones.com
• The water pump must operate with fresh, soft water, otherwise the motor may be
subject to damage
• It is recommended that the filters on the 220 V compressor and 12 V compressor
be replaced after each refill.
CAUTION
7. Dangers
•
The non-respect of these elementary rules of scuba diving may engender risks of
drowning or physical damages which can cause death
•
In case of shock, the equipment can be damaged without visual harms, in case of doubt,
make your equipment inspected by a specialist
•
It is totally forbidden to change the layout or to modify the different pieces of the
Karbones
•
Never integrate elements from the Karbones on an other (diving) equipment or
vice versa
•
Never introduce water in the equipment