COPTONIX I2C-RS232-Adapter, Руководство пользователя

Страница: 15 / 15

Rev1.4 April 2014
15
7. ASCII Commands
(Only RS232-controlled devices / #020101)
The data of an I2C master are temporarily stored and then transmitted through the serial interface. A data packet may be maximal
128 bytes.
I2CdataAvail 0x69 i d
1
,d
2
,…d
128
’69’+’ XXYYZZ…. ’ +<CR> I2C-Data received from I2C-Master
<CR> : CarriageReturn (0x0D). Commands and data are always terminated with a Carriage Return.
*) ChangeSlaveAdress / GetSlaveAdress:
XX the Slave address.
e.g. in order to change the address to 0x40, we would send the following string terminated with a carriage return: ’c 40 ’+<CR>
**) WriteData:
XXYYZZ... data to send to the adapter. Packet size is at least one byte and maximum 128 bytes.
Example: in order to write 5 Bytes 0xA1, 0x1F, 0x22, 0x5C, 0xB0 into RAM of the adapter, then the following string
(terminated with a carriage return) should be sent over the serial interface: ’
w A11F225CB0 ’+ <CR>
RS232 – Settings:
Baudrate: 19200
DataBits: 8
StopBits:
1
Parity: None
Code Description Command
Hex Char Parameter CMD + Data (->RS232) Response (<- RS232)
GetSlaveAddress* 0x61 a ’a’ +<CR> ’61’ + ’ XX ’+ <CR> Read Slave address
ChangeSlaveAdress * 0x63 c d
1
’c’ + ’ XX ’+ <CR> ’63’ +<CR> Change Slave Address
SaveSlaveAddress 0x73 s ’s’+ <CR> ’73’+ <CR> Save Slave address into EEPROM
WriteData ** 0x77 w d
1
,d
2
,…d
128
’w’+’ XXYYZZ…. ’ +<CR> ’77’+ <CR> Write Data into RAM without Interrupt
WriteDataInt1 0x78 x d
1
,d
2
,…d
128
’x’+’ XXYYZZ…. ’ +<CR> ’78’+ <CR> Write Data into RAM with Interrupt output 1
WriteDataInt2 0x79 y d
1
,d
2
,…d
128
’y’+’ XXYYZZ…. ’ +<CR> ’79’+ <CR> Write Data into RAM with Interrupt output 2