CX-CT6A
13
Computer Transmitter
13.02 System Function Settings
If you want to save your settings, click “SAVE” on the main
interface. You can then give it a name and click “SAVE” to save.
If you want to open your settings, click “OPEN” on the main
interface. Select the file and click “OPEN” to open.
To adjust the movement of servo to a suitable angle for a
better control, click “EndPoint”. Each servo can be adjusted
individually. It is divided into left half part and right half part.
Adjusted value is from 0% to 100%. You can enter the
numbers directly through the keyboard.
Click “OK” when the adjustment is finished.
To restore, click “Cancel”.
To change the direction of servo movement, click “Reverse”. It
keeps the transmitter control direction corresponding to the
servo.
Click the channel you want to change.
Click “OK” when the adjustment is finished.
To adjust single space servo for better control of the model,
click “SubTrim”. Each servo can be adjusted individually.
Adjusted value is from -120 to 120. You can enter the numbers
directly through the keyboard.
Click “OK” when the adjustment is finished.
