1. Introduction
Thank you for choosing CopterX CX-CT3A Transmitter with CX-CR3F Receiver 2.4G radio control
system, if you are the first time to use this type of products, please read this statement carefully and
strictly in accordance with the requirements of operation. You could refer to the manual if you meet
any problems during the operation. Please well keep the manual after use because you might have
to use it again next time.
2. Service
If any difficulties are encountered while setting up or operating your system, please consult the
instruction manual first. For further assistance, you may also refer to your hobby dealer or contact
CopterX technical service:
3. Meaning of special markings
Pay special attention to safety where indicated by the following marks:
Warning
: Always keep electrical components away from small children.
RUNNING SAFETY - To ensure the safety of yourself and others, please serve the following precautions:
Procedures which may lead to dangerous conditions and cause death / serious
injury if not carried out properly.
02
CX-CT3A
2.4GHz 3 channel Radio System
Procedures where the possibility of serious injury to the user is small, but there is
a danger of injury, or physical damage, if not carried out properly.
Procedures which may lead to a dangerous condition or cause death / serious
injury to the user if not carried out properly, or procedures where the probability
of superficial injury or physical damage is high.
Don't fly / run at night, bad weather such as rainy or thundering days. It will interfere the
transmitter signal. Thereby it will create out of control and unexpected accident.
Before you fly / run, please make sure the movement of server correspond with the direc-
tion of joysticks, If inconsistent, please adjust before fly / run.
You need to turn the throttle channel (CH2) and inching switch to the lowest before you
use. Then switch on the transmitter power, finally connect the receiver.
The sequence to shut down is that turn off the receiver power first, and then the transmitter
power. If the above operations are reverse, it might lead to uncontrolled and cause accident.
