950-779-115-02, Revision 02
Installation and Turn-up
PRL-770 and PRL-779 List 1E and 2E
March 17, 2000
9
W
IRING
THE
RT
Wiring the RT consists of three major steps:
•
attaching the frame ground wire
•
attaching the HDSL Tip and Ring wires
•
attaching the subscriber line wires
During installation, refer to the RT Reference label (see
) affixed inside the Telco Access door. The
Reference label identifies the Frame Ground and HDSL Tip and Ring, and the Subscriber Line wires.
Figure 6.
Reference Label
Before setting up the equipment, select a location that will allow sufficient access to wiring
connections from the telco access door.
