CopperOptics 150-1236-05 Скачать руководство пользователя страница 13

Section 150-319-251

Revision 01

Page 13

TABLE 5.  ELU-319 STATUS MENU DEFINITIONS

Message

Full Name

Description

ALARMS

NONE

No Alarms

LLOS

Local Loss of Signal

No signal from local G.703 interface.

RLOS

Remote Loss of Signal

No signal from remote G.703 interface.

LOSW 1 (2)

Loss of (HDSL) Sync Word 1
or 2

HDSL LOOP 1 or 2 has lost frame sync.

H1ES

HDSL Loop 1 Errored Second

The number of Loop 1’s Errored Seconds has exceeded the
user-selected Errored Seconds threshold.

H2ES

HDSL Loop 2 Errored Second

The number of Loop 2’s Errored Seconds has exceeded the
user-selected Errored Seconds threshold.

G.703

G.703

G.703 input BPVs have exceeded the user selected ES
threshold.

MAL1

Margin Alarm (HDSL Loop 1)

The margin on HDSL Loop 1 dropped below the Margin
Alarm Threshold (1 to 15).  Setting the threshold to 0 (zero)
inhibits the alarm.

MAL2

Margin Alarm (HDSL Loop 2)

The margin on HDSL Loop 2 dropped below the user Margin
Alarm Threshold (1 to 15).  Setting the threshold to 0 (zero)
inhibits the alarm.

ACO

Alarm Cut Off

Al Alarm cut-off is in effect.

LAIS

Local Alarm
Indicating Signal

Indicates an AIS (all 1’s) pattern is being transmitted from
the local G.703 output port.

RAIS

Remote Alarm Indicating Signal

Indicates an AIS (all 1’s) pattern is being transmitted from

the remote G.703 output port.

LOOPBACKS

NREM

Network Remote Loopback

Loopback at ERU-412 (remote) towards network initiated
from ERU-412 front panel pushbutton, or maintenance
terminal, or by pressing both the MODE & SEL ELU front
panel pushbuttons.  See Figure 4.

NLOC

Network Local Loopback

Loopback at ELU-319 (local) towards network by pressing

both MODE and SEL pushbuttons on the ELU-319 front
panel.  See Figure 4.

NDU

Network Doubler Loopback

Loopback at Doubler towards network initiated from
Loopback Mode menu screen or by pressing both the MODE
SEL ELU front panel pushbuttons.  See Figure 4.

CLOC

Customer Local Loopback

Loopback at ERU-412 (local) towards customer interface
(CI) initiated from the maintenance terminal or by pressing
both MODE and SEL pushbuttons on the ELU-319 front
panel.  See Figure 4.

Table continued on next page

Содержание 150-1236-05
























Отзывы: