8
The Power Copper Chef Induction Cooktop™
Using the Digital Control Panel
1. Induction Timer Button
- Allows user to add/decrease
time in 1 minute intervals up to 150 minutes (2.5 hrs.)
Once time has elapsed, the Digital Display will go
to OFF position. Default time setting is 2.5 hours.
2. Keep Warm Button
- Presets temperature to run
continuously at 175°F to keep food warm.
3. Temperature Decrease Button
- Allows user to lower
temperature or decrease time.
4. Low Button
- Sets temperature to run continuously
at 100°F.
5. LED Display
- Indicates time, temperature, OFF.
6. Medium Button
- Sets temperature to run continuously
at 275°F.
7. High Button
- Sets temperature to run continuously
at 425°F.
8. Temperature Increase Button
- Allows user to raise
temperature or increase time.
9. Sear Button
- Sets temperature to run continuously at
500°F. The Digital Display for this selection will
read “SEAR.”
10. ON/OFF Button
- Select ON/OFF Button to begin
cooking cycle or to power on/off device.
The Copper Chef Induction Cooktop
The Copper Chef Induction Cooktop
TM
makes cooking easy. A series of preset functions combined with full control
of precise, maintainable heat settings and time, guarantees perfect results. Induction cooking conserves energy while
reducing kitchen heat and exposure to open flames and dangerous hot coils common to conventional cooking methods.
Note: Any of the preset temperatures may be increased or reduced and time may be added or reduced at any point during
the cooking cycle.
To Set Your Own Cooking Temperature
A. Plug Unit into wall outlet. Display will go to OFF.
B. Choose the Low Button. This will set the temperature
at 100°F.
C. Press the Temperature Increase Button (8) 1 time to
raise the temperature 10°F with each push.
When you reach the desired temperature, select
a cook time as shown below or select the ON/OFF
Button and continuous cooking will begin immediately.
To Set Your Cooking Time
Once your Cooking Temperature has been selected:
A. Select the Induction Timer Button. The Digital Display
will show “0”.
B. Select the Temperature Increase Button and hold
until display reaches the desired time. Select ON/OFF
Button and cooking will begin. Cooktop will go to OFF
Mode once cook time has elapsed.
Note:
LED will alternate between Time & Temperature.
1
3
5
8
10
2
4
6
7
9
CCIC_IB_TP_ENG_V3_161206.indd 8
12/6/16 4:55 PM
