4
Front Panel
1
2
3
4
5
6
6
7
8
9
1. Digital Source Selector:
Selects the type of digital input signal source.
The BT=Bluetooth function is optional extra. The
amplifier is prepared for a future HD-Bluetooth
module.
2. Digital / LED:
Blue light indicates that the Digital Source Selector
is activated.
3. Lock / LED:
Orange light indicates that a Digital Source is
locked and activated.
4. High / LED:
Orange light indicates that the sampling rate of the
incoming signal is equal to or higher than 96kHz.
5. Source Selector:
Selects the appropriate input signal source.
6. Display:
The display shows the selected source input.
PH = LED indicates activated Phono input.
B. = LED indicates Balanced Inputs
1. = LED indicates Analog Input no.1
2. = LED indicates Analog Input no.2
D. = LED indicates that the Digital Source Selector
is activated.
A flashing ‘ON’ lamp indicates that the amplifier is
under its 15 seconds start up procedure or in
protection mode.
7. St. By Switch:
Pressing the key, the amplifier will switch cyclically
between operation and standby mode. Power
‘
On
’
and
‘
Stand By
’
are indicated in the display.
8. Audio level.
Turn the control clockwise to increase the volume.
9. Headphone.
Output for Headphones