Care Instructions
To care for and preserve the finish on your new Copeland Furniture piece, please keep the following
recommendations in mind.
While our furniture has been finished with a durable top coat, the surface may be sensitive to dents
and abrasions during the first 30 days in your home.
Treat the surface finish gently so it does not dent or chip. Tape or stickers should not be put on the
finish.
For general care use a soft cloth to dust the furniture.
Use damp cloth with a mild soap to clean-up spills or dirt. Dry the surface thoroughly.
Please do not use any polishes, waxes or solvents to clean the surface of the furniture. This holds
true for new Copeland Furniture pieces as well as items you may already have in your home.
Please do not place any candles directly on the surface of your furniture. The perfumes and dyes
in the candles may penetrate the finish.
Beds must be disassembled before moving to avoid damage. Never attempt to move the bed while
it is assembled.
If you have any questions or difficulties, please call us at the number below between the hours of 8:00 am and 4:30 pm eastern time.
156 Industrial Drive, Bradford, VT 05033 Tel: 802.222.9282 Fax: 802.222.9285 www.copelandfurniture.com
Figure 9
.
Install
footboard rail
Footboard Rail
Bed Deck
#8 -
32 x 1”
machine
screws w/
washers
Step 8:
Install
footboard rail
Footboard Rail
Attach the footboard rail to the footboard
deck end by using #8
– 32 x 1” machine
screws with washers (
Figure 9
). Your
bed is fully assembled (
Figure 10
).
Footboard Deck
End
Headboard
Figure 10
.
Bed after assembly
Hairpin Leg
Tools required
4
Philips head screwdriver
