32
Releasing Procedure
• Use the sleep mode when you are going to bed.If this mode is used in the day,the capacity is reduced since the
ambient temperature is too high.(COOL MODE).
• During the operation of cooling,the room temperature will be raised gradually by 2 ˚C higher than the setting after
the machine begins to operate in the sleeping mode.
• During the operation of heating mode,the room temperature will be dropped gradually 5 ˚C lower than the setting
after the machine begins to operate in the sleeping mode.
Not:
Use this mode to reduce operation sound when sleeping,etc.
Press the SLEEP button,the air flow sound from the indoor unit is decreased.
Press the SLEEP button again can release the mode.
Sleep Operation
• When the signal from the remote controller becomes weak and the indoor unit can not
receive it properly;or the indications on the display screen becomes blurred,please slide the
back cover and replace with two new batteries.
• The positive and negative poles must match the installation positions.
• New batteries of the same type have to be used for replacement.
• If the remote controller is not to be used for long time,take out the batteries so as to
prevent the leakage of the electrolyte from damaging the controller.
• If when the remote controller is at abnormal state,you can take out the batteries on the
back cover to clear off the display.
Replacement Of Batteries
USER'S MANUAL
When the indication on display screen is 24 hour,press the TIMER button again to delete the timed mode.
CLK Button
RST Button
It does not work on this model.
This button let computer reset.
(push the RST button with the tip of a
ball pen,etc)
Unload the back Cover
slide the back cover
slide the front cover
