(2)
DHCP client
: Enable or Disable
(3)
Destination IP address / socket port(TCP client and UDP)
: To set the
correspondent DVR’s IP Address and its Socket port(set as
2002
)
(4)
Packet mode of serial input
: Set as Enable
(5)
Device ID
: The correspondent number to DVR. (ex. 1 as the camera 1 of the
DVR).
(6)
Report device ID when connected
: Set as Enable
(7)
Setup Password
: Enter the password if you want to restrict the access on the
Controller Status Page.
(8)
Serial Port 1:
Socket port
: Set as TCP Client (2002)
Interface
: Set as RS232
Baud rate, parity, data and stop bits
: Set according to the POS machine. Ex.
Baud rate: 9600; parity: n; data: 8; stop bits: 1
(9)No particular settings of other columns.
c. After setting up, please do not forget to click
Update
to configure.
4. Illustration
Superimpose text info on the DVR monitoring images:
a. After completing the related settings, all text info of RS-232 Output devices can be
superimposed onto the real-time monitoring images, remote monitoring images, and
recording images of DVR. When in single split/full screen mode, the text info will be
displayed on the screen; while in other split modes, you have to click the button
then display the text and click again not to display them. (Text color is the same with
DVR camera text settings.)
