COP-USA DVR2704XE-L, Руководство пользователя

Страница: 36 / 114

DVR User Manual
30
4.6.5 Other Settings
If your DVR is setup to use PPPoE as its default network connection, you may setup
DDNS to be used in connection. The setting steps are as follows:
Step 1: Select Other Settings tab. Enable DDNS server.
Step2: Select DDNS server.
Step 3: Input user name, password and host domain name registered in the DNS website
(See the following example).
Step 4: Click TEST to test the effectiveness of the relevant information.
Step 5: Click “apply” button to save the settings.
Note: The domain name server that selected by user is a banding domain name of DVR.
User should logon the website which provided by the server supplier to register a user
name and password firstly, and then apply for a domain name on line. Fig 4-30 Other Settings
Once applied, user can access the server from the IE client by using that domain name.
Enable UPnP: User may select UPnP and then enable UPnP function in the user‟s router. Then there is no need for user to forward its IP
address and port in router in connection of internet.

How to apply for a domain name?
Here we take www.dyndns.com for example.
Step 1: Input www.dyndns.com in the IE address bar. Click ”Free Trial of DynDNS Pro”
 ”Start the trial” to register.
Step 2: Input hostname, select service type and input your IP address. The picture is shown as follows: