COP-USA DR3004F Скачать руководство пользователя страница 31

Страница: 31 / 114

MAXDVR & DR

Series

Cards

separately and the record file are also saved separately. The parameters, i.e.

camera ID, record date/time and record mode are all saved together with the

record file.

Record Setup

Fig3.5 Record Configuration Panel

In the ‘Record Panel’ of the Basic Configuration page, users can set all

kinds of necessary parameters for recording.

[Time stamp]: By selecting the options, the record date / time message

appears in the record file images.

[Switch]: By selecting the options, users can turn on corresponding

cameras. In case there is no camera for some channel, don’t select the option

so as to save system resource.

[Manual record]: By selecting the options, the relative camera images will

be recorded and saved all the time.

[Manual recording frame rate]: Select the record frame rate for manual

record mode

[Schedule Record]: Schedule record option.

[Schedule Record Frame Rate]: Select Schedule Record frame rate

[Motion Detection]: By selecting the options, users can set relative

channels’ record mode as motion detection

[Motion Record Frame Rate]: Select record frame rate for Motion

Detection record mode

Содержание DR3004F



















































































































Результаты поиска

Содержание DR3004F

Отзывы:

COP-USA DR3004F, Руководство пользователя, Страница: 31 / 114

Результаты поиска

Содержание DR3004F

Отзывы: