SuperDVR & TDF Cards
31
Note:
It’s common to select high frame rate for short time manual record,
while select low frame rate for long time Schedule Record.
3.3.5 Sensor Alarm Record Mode
Users can use sensors to trigger sensor alarm record for relative
channels. When at that time, the record status indicator light will turn red.
3.3.6 Motion Detection Record Mode
It will enable the system to detect image changes and begin to record by
activating motion detection and motion alarm record. For instance, somebody
opens the door, and the system detects image changes and begins to record,
then users can play back the recorded file and find out who opened door.
When there is no movement, the system won’t record and that’s helpful for
saving system resource, and convenient for searching for event record file.
The indicator light color in the record status panel is red.
Note: Users may need to setup in three places so as to enable motion
detection record mode.
(1) Select ‘Motion Detection’ for certain channels in ‘Basic Configuration’
(2) Set the motion detection areas for certain channels in ‘Motion
Detection configuration’ in ‘Basic Configuration’
(3) Set working schedule for certain channels in ‘Schedule configuration’
in ‘Basic configuration’
3.3.7 Schedule
Record
Users can set working schedule for all kinds of record modes in
‘Schedule configuration’ in ‘Basic configuration’. The green light in record
status panel shows the corresponding channel is in Schedule Record
mode. Users can change record mode to manual record at any time, and
the green light will change into blue light.
Please refer to chapter 4.4 for details.
