Setup menu
Press the MENU key will get into setup menu.
There have 4 setup pages, press the MENU key repetitious to change the menu pages.
Use keys “
←
” or “
→
” to select the item that want to change, then use “
＋
” or “
―
”
keys to change the value or status.
1
st
OSD menu
AUTO RESET : Every time there has an ALARM or V.LOSS event, it will trigger an
internal counter. When the counter reach the value that user set this
unit will clear the event automatically.(unit : second)
User can clear the event by press any key.
ALARM SENS.: The ALARM event will not occur unless the ALARM trigger is
longer than what user set.(Unit : millisecond)
V.LOSS SENS.: The V.LOSS event will not occur unless the V.LOSS trigger is longer
than what user set.(Unit : millisecond)
QUAD INTERVAL : The timing for sequential QUAD MODE. (Unit : second)
2
nd
OSD menu
CH : Select the input channel user want to set.
TITLE : 6 characters can be set for each channel.
INTERVAL : The timing for sequential CAMERA MODE.
COLOR : Color killer, default is AUTO. If the video signal of selected channel is with
very low chroma level, it must be set to FIX to disable the automatic
chroma remover. It usually happened with a very long cable connection of
the length will depend on the specification of cable.
BRI. : Adjust the brightness of input video.
CON. :Adjust the contrast of input video.
SAT. : Adjust the saturation of input video.
HUE : Adjust the hue of input video.
ALARM : There has three parts of this item.
1
st
one is to set the type of external alarm equipment. (NC or NO)
2
ND
one is the status detected by this unit in power-on initialization. (OPEN or
CLOSE)
3
rd
one is to enable or disable ALARM trigger of this channel. (ON or OFF)
10
9
