b. Hold down the button that needs to turn off the burst function, and then press the
PS4
button / X1
button / NS Pro
button, so that the burst function of the
corresponding button can be turned off.
c. Press the PS4
button / X1
button / NS Pro
button to exit the configuration mode.
3.Elimination of all the burst
a. Press the PS4
button / X1
button / NS Pro
PS4
button / X1
button
/ NS Pro
button at the same time and release to enter the burst function configuration
mode.
b. Hold down the PS4
button / X1
button / NS Pro
button for 3 seconds, all the
configured burst function will be eliminated automatically, and it will exit the configuration
mode automatically.
4.Adjust the burst frequency(Basic mode)
a. Press the PS4
button / X1
button / NS Pro
PS4
button / X1
button
/ NS Pro
button at the same time and release to enter the burst function configuration
mode.
b. Press the
to Increase the burst frequency
c. Press the
to reduce the burst frequency
d. Press the PS4
button / X1
button / NS Pro
button to exit the configuration
mode.
5.Adjust the burst frequency(Custom mode)
In custom mode, the user can set two parameters: press time a millisecond and release
time b milliseconds. When the burst starts, the key is automatically pressed for a
millisecond, then released for b milliseconds, and then pressed a millisecond for a round
trip. The values of a and b should be greater than 4 and less than 252.
a. Determine the value you want to set, such as a is 128, b is 164
b. Press the PS4
button / X1
button / NS Pro
PS4
button /
X1
button / NS Pro
button at the same time left and release, enter the serial
configuration mode
