Wall Mounted Fireplace
H766
Instructions for Use
Please read and retain these instructions for future reference
v001: 17/03/21
Disclaimer : To avoid any risk of
fire, make sure that nothing is placed on
top of the heater. The minimum distances
indicated below must be respected for
good fire prevention.
Up side
1.0m
Down side
0.5m
Left side
0.5m
Right side
0.5m
Important :
Always make sure that the unit is unplugged from the power supply before beginning installation.
Never move or clean the heater while it is plugged in.
Check the wall to make sure there are no wires, pipes, etc. when drilling holes in this area.
The heater cannot be fixed to a cavity wall. It must be fixed to a solid wall
First, fix the three dowels to the wall according to the distances shown in the picture below, then drive the
three 4*45mm screws into the wall mounting bracket and into the dowels that have been fixed to the wall.
