SAFETY INFORMATION
• This machine can cause serious injuries. Read the instructions carefully so you
know how to use it correctly.
• Make yourself familiar with all the components on the machine and how to
use it properly.
• Children must never be allowed to use the brush cutter.
• Do not use the brush cutter and trimmer when people are nearby, particularly
children.
• Wear suitable clothing. Do not wear loose clothing as it may get caught in
moving parts. We recommend that you wear strong gloves, non-slip shoes and
safety goggles.
• Handle fuel with care, it is highly inflammable and the fumes are explosive. Be
sure you never remove the fuel tank cap or refuel if the engine is running or
hot. Prior to refuelling the equipment, allow the engine and the exhaust parts
to cool down.
• Never store the brush cutter and trimmer in a room with a naked flame, for
example a lit water heater.
• If petrol has overflowed, do not attempt to start the engine. Instead remove
the equipment from the affected area first.
• Do not carry out any repair work on the machine unless you have been trained
to do so.
• Do not use the machine if it has a damaged or excessively worn cutter.
• The machine may exceed 100dB you may therefore require the use of ear
defenders.
• Always make sure that all the component parts and safety equipment are fitted
whilst you are using the machine. Never attempt to use an incomplete machine
or one that has been modified.
• Always use both hands on the brush cutter and trimmer.
• Make yourself familiar with your surroundings and watch for possible dangers
that you may not be able to hear due to the noise generated by the machine.
• If the blade or trimmer touch a foreign body or the brush cutter and trimmer
vibrate severely, switch off the engine and wait for the machine to stop. Pull off
the spark plug boot from the spark plug and carry out the following measures:
1. Check for damage.
2. Check for loose parts and secure all loose parts.
3. Replace the damaged parts with equivalent spare parts or have the damaged
parts repaired.
4. Clean or remove a blockage.
• Store the machine in a safe place. Carefully open the fuel tank cap beforehand
to release any pressure that may have built up in the tank.
• Start the machine at least 3m away from the refuelling site to avoid the
possible risk of fire.
• Keep the handles dry, clean and free from the fuel mixture, oil and grease.
• Do not use any fuel other than that recommended in the instructions for use.
Never use pure petrol, always use the specified petrol and oil mixture.
Otherwise the machine may incur permanent damage.
• Check all screws and seals at regular intervals to ensure that they are tight and
tighten them if necessary. Never use the machine if it has not been properly
adjusted or has not been fully or safely assembled.
• Always clear items such as bottles, stones, etc. away from where you are
working. Catapulted items may cause serious injuries to the user or people
nearby and may also damage the machine. If you strike an item by accident,
switch off the machine immediately and check it. Never work with a damaged
or broken machine.
• Do not modify, remove or add any things to any components of this machine.
This could cause injuries or damage the machine and void the manufacturer’s
warranty.
• Do not use the machine when you are tired or for lengthy periods without
breaks.
• Do not use the machine if you have consumed alcohol, drugs or strong
medication.
• Always hold the machine with both hands so that your fingers and thumbs are
hooked around the handle.
• Only use the machine outdoors. Exhaust fumes are toxic.
• The engine exhaust from this product contains chemicals known to cause
cancer, birth defects and / or other reproductive harm.
• The exhaust muffler and the muffler cover may become extremely hot. Always
keep clear of the exhaust and muffler area other it may cause serious personal
injury.
• Any errors made in these safety regulations and instructions may result in a fire
and/or serious injury.
• Please note that this equipment has not been designed for use in commercial,
trade or industrial applications.
• The machine is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind caused as a result of this.
Safety information
7
Operation
NYLON TRIMMER ASSEMBLY
(removing blade cutter first)
(1) Carefully tilt the machine backwards so it rests
on its handle. It is recommended you protect the
trigger lever to prevent it from becoming
damaged or broken whilst following the rest of
these assembly steps.
(2) Unscrew and loosen the plastic shield bracket
and re-position it temporarily further up the
drive shaft.
(3) Unscrew and remove the spring tensioner
bracket on the drive shaft
(4) Unscrew the blade safety guard plate
(5) Align the holes in the blade shaft and drive shaft
and insert the 5mm Allen keythrough both
holes.
(6) Holding the spark plug socket with one hand
and with your other hand hold the Allen key
unscrew the locking nut in an anti-clockwise
motion.
(7) The blade, safety guard and spring tensioner can
now be eaily be removed.
(8) Holding the nylon trimmer so that bump start
button faces the ground hold the Allen key with
one hand and with the other hand tighten by
turning in a clockwise motion.
(9) Re-position the plastic safety guard at the
bottom of the drive shaft directly behind the
drive shaft head and tighten the two bolts on
the plastic shield bracket.
WARNING
Moving parts can amputate fingers or
cause severe injuries. Keep hands,
clothing and loose objects away from all
openings. Always stop engine,
disconnect spark plug, and make sure
all moving parts have come to a
complete stop before removing
obstructions, clearing debris, or
servicing unit. Allow unit to cool before
performing service. Wear gloves to
protect your hands from sharp edges
and hot surfaces.
10
