Total Body Exerciser Cycle
8829
Instructions for Use
Please read and retain these instructions for future reference
v002: 13/03/17
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Parts List
4x Bolts for pedals/handlebar 2x Foot bar
1x Plastic sleeve
4x End Caps
2x Tension control knobs
1x Frame
1x Screw for plastic sleeve
2x Foot Pedals
4x Nuts for foot bar
1x Upper tube
2x Locking nuts
2x Handlebar pedals
4x Bolts for foot bar
1x Lower tube
2x Bolts
Fit plastic cap onto
each end of the foot
bars.
Secure the foot bar to
the frame. Using nuts
and bolts supplied.
Place the two
bearings around the
steel pedal rod with
the metal tension
piece fitting in the
groove.
Slide the bearings and
steel rod into the
bearing case.
Tighten down the
tension control knob
before putting on the
pedals.
Push pedal onto the
steel rod. Tighten
bolts with the Allen
key.
