6
Threading the lower bobbin
Caution:
When threading the lower bobbin, make sure the power switch is OFF.
Setting lower thread
1.
Slide the bobbin cover forward and take it off. (Fig. 1)
2.
Place the bobbin into the bobbin case (
please note:
be sure that the thread
unwinds as shown on the diagram inside the bobbin cover).(Fig. 2 & 3)
Drawing up lower thread
1.
Hold the end of the upper thread with your left hand, turn the hand wheel from
left to right with your right hand.(Fig. 4)
2.
As the needle goes down, the bobbin case starts running. When the needle turns
to the lowest position, the hook of bobbin case will meet the upper thread, then
the bobbin thread will be drawn up by upper thread after the shuttle turns a circle.
Pull the lower thread through completely. Put the upper and lower threads toward
the back of the machine, place them under the presser foot, leaving at least 10cm
trailing.(Fig. 5)
3.
Slide bobbin cover back right position.(Fig. 6)
Fig. 1
Fig. 4
Fig. 2
Fig. 5
Fig. 3
Fig. 6
Содержание 8495
Страница 1: ...Mini Sewing Machine 8495 Instructions ...