Cordless Lawn Mower
10679
Instructions for Use
Please read and retain these instructions for future reference
v004: 13/06/17
INSTALLING THE HANDLE
Prior to installing the handle, slide the power cord holding
hook onto the top part. Figure 3.1
Connect the bottom part of the handle to the lawnmower. Figure 3.3
Attach the power cord to the handle using the plastic clips.
Note: The handle is height adjustable and can be folded down for storage.
INSTALLING THE GRASS CATCHER, ATTACHING THE WHEEL COVER
Attach the handle to the top part of the grass catcher using the included screws. Figure 4.1.
Connect the top and bottom part of the grass catcher. Figure 4.2.
To seat the grass catcher onto the lawnmower, it is first necessary to lift the rear safety grass catcher
cover. Figure 4.3
Put the lawnmower wheel onto the axle. Figure 4.4, point 1. Put on the washer and secure in place
using the cotter pin. Figure 4.4, point 2 and 3.
Finally put on the wheel cover. Repeat this procedure for all 4 wheels.
ATTENTION: The grass catcher is equipped with a full indicator. Figure 4.1, point A. if the flap is
lifted, the grass cutter is not full. Otherwise, it is necessary to empty the grass catcher.