Digital Radio & Alarm Clock
10477
Instructions for Use
Please read and retain these instructions for future reference
v001: 12/08/16
Power status
Display the power supply is adaptor or battery. If the power supply is battery, the display will show the battery
capacity.
Time
This display the current time provided automatically by the broadcaster.
Date
This display the current date provided automatically by the broadcaster.
STORING AND RECALLING STORED STATIONS
This function allows up to 10 stations to be programmed into the memory and stored in both DAB and FM mode.
1. To store a preset, first tune to your desired station, then press and hold the
PRESET
button for longer than
2 seconds ,the display will show the “Preset Store <#:(Empty)>” (F7).
2. Rotate the
SEARCH
control to select your desired station preset number.
3. Press the
SELECT
to confirm your selection, the station now broadcasting has now been stored in the
selected location (F8).
4. To listen to the preset stations, press the
PRESET
button once and then rotate the
SEARCH
control to select
the desired preset location. And press the
SELECT
button to confirm. (F.9) The station name or frequency
and preset location number will be displayed in the lower half of the display. If the preset has not been
allocated ‘Preset Recall #: (Empty)’, “Preset empty” will be shown in the display.
Notes:
If the unit is disconnected from the mains supply for any length of time and the batteries are not installed, the
programmed stations will be lost.
SETTING ALARMS (AC OPERATION ONLY)
1. Alarm will only function when the product is on Mains power. Attempting to enter Standby mode when
powered only by battery will turn the product off.
2. An active alarm is indicated by its icon in the top line of the display in standby mode.
3. Alarms can be switched on or off in standby mode. However, the alarm parameters can only be set when
the product is on.
4. To set or change alarm 1, press
ALARM/SNOOZE
button once, then press the
SELECT
button. (F.10)