ELECTRIC PATIO CLEANING BRUSH
–
H062
Instructions for Use
Please read and retain these instructions for future reference
v001: 19/02/20
Page No. 13
CLEANING
Do not jet water onto the trimmer and do not clean it under flowing water. This would result in the
danger of an electric shock and the trimmer could be damaged.
Always keep the device clean. Do not use cleaning agents and solvents.
Clean the device, brush and splash guard with a soft brush or cloth after every use.
Keep the louvres clean.
MAINTENANCE
Only use spare parts and accessories that have been supplied or recommended by the manufacturer.
Always inspect the equipment before it is to be used. Do not operate the equipment if safety devices,
parts of the cutting device or bolts are missing, worn out or damaged.
Always inspect the brush before starting the device. Never use damaged brushes. Replace any damaged or
worn brush.
STORAGE
Store the appliance in a dry place well out of reach of children.
Do not expose the device for extended periods to direct sunlight. This could damage the device.
Do not warp plastic sacks around the appliance as this could result in the formation of moisture and mould.
DISPOSAL
Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local recycling
regulations.
Plastics – This is made from the following plastic.
Polyethylene
Terephthalate
High-Density
Polyethylene
Polyvinyl
Chloride
Low Density
Polyethylene
Polypropylene Polystyrene
•
Aluminium – the handle is made from the following Aluminium
At the end of the product’s lifespan please dispose of it at an authorised household WEEE waste
recycling centre.
