Stone Effect Fireplace
H790
Instructions for Use
Please read and retain these instructions for future reference
v001: 10/05/21
10/05/21
Heating ON/OFF
Heating Mode Quick Start
Press or - to quick start heat setting (even if the heater is running under a preset weekly
program) as following:
c.
Press either or - to see the current temperature on screen.
d.
Press or - to adjust the temperature as desired. Press button OK to validate the setting. If the
set temperature is higher than the room temperature detected by appliance, the heating starts. The
heating will not start if the set temperature is lower than the room temperature.
NOTE: The temperature range including OFF, from 10°C to 30°C and ON. OFF for no heating, 10°C to 30°C
is the selectable temperatures and ON for continuous heating.
LOW/HIGH HEATING & SETTING THE TEMPERATURE
High Heating
At default interface, press button MENU to display H and flashing heating icon as following:
Press OK button to set temperature. The default temperature is 10°C(50°F). It’s displayed as follow
s:
Press or - to adjust temperature. If the set temperature is higher than the room temperature
detected by appliance, the heating starts. The heating will not start if the set temperature is lower than
the room temperature.