Oscillating Tower Heater
H765
Instructions for Use
Please read and retain these instructions for future reference
v001: 19/03/21
USING THE HEATER
•
Carefully remove the heater from the plastic bag and the carton.
•
Place the heater on a firm level surface.
•
Setting the master button to “off”, on the base of the unit, plug the cord set into a 220
-240v AC
electrical outlet.
•
Plug in, turn the master button on the heater to the on position, the heater is in standby mode,
LED display room temperature,
centigrade light.
•
Turn the heater ON by pressing the ON/OFF button
“
”.
The unit is now in fan mode. This will
conduct recirculation of the room air
，
LED display room temperature,
centigrade
light.
•
•
Upon pressing the “
”
button the unit will be in the
LOW
heat mode
, it’s 1200W rating
power.
light.
•
Pressing the “
”
button second time will put the heater into
HIGH
heat mode
, it’s 2400W
rating power, together
light
•
Pressing the “
”
button third time will run the heater in fan mode ,LED display room
temperature,
centigrade
light.
•
To turn the heater OFF, press the ON/OFF button
“
”
.
•
NOTE: To assist in maintaining the internal components, after pressing the “
ON/OFF
” button “
”
the fan will continue to blow room air for a period of 30-60 seconds before shutting down to
standby.
•
OSCILLATING BUTTON
•
This heater has an oscillating function. To switch the function on, press the
“
“
button and
“
”light,
To stop it, press the swing button again.
TIMER FUNCTION
