Portable CD Player
F941
Instructions for Use
Please read and retain these instructions for future reference
v001: 17/04/19
2. Follow the polarity diagram shown in the BATTERY COMPARTMENT to insert 2 X ‘AA’ size (UM-3)
batteries and close the BATTERY COMPARTNMENT DOOR .
AC ADAPTER (not included) OPERATION
(AC adapter: input 240V – 50/60Hz, output 4.5VDC 700mA)
1.
Plug the AC adapter (not included) into normal AC power outlet socket.
2.
Insert the DC plug of the AC adapter cord into the DC IN JACK (#15).
3.
When the unit is operated using AC adapter, the battery source will automatically be disconnected.
WARNING : Before connecting to the power supply, ensure that the supply corresponds to the information
on the rating label at the back of the apparatus.
USB POWER
The CD Player can be operate by USB power DC 5V 500mA).
Plug one end(micro USB plug) of the USB cable into the USB PORT (#14) and the other end of the cable
to the USB charger/power bank/computer (not include)
When the unit is operated using USB power, the battery source will automatically be disconnected.
Earphones Connection
Connect the plug of the stereo earphone (included) into the EARPHONES JACK (#9)
CAUTION
Avoid excessive volume levels for long period of time when using the earphones. Prolonged use at high
levels may impair your hearing.
Do not use earphones while operating a motorized vehicle, as it may create a traffic hazard and is illegal
in many areas
CD Operation
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to fully read all commercial CDs. They will also read
self-compiled CD-R/CD-RW discs but it may take up to 10 seconds for playback to start. If playback does not
start, it is likely due to the quality of the CD-R/RW disc and/or the compatibility of the CD compilation
software. Manufacturer is not responsible for the playback quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
1.
Tap the POWER ON BUTTON (#6) to turn on the unit.
2.
Slide the CD DOOR OPEN SWITCH (#13) to open the CD door. Carefully place an audio CD/MP3 CD with
its label side upward in the CD compartment and close the CD door.
3.
The player will start reading TOC (contents) of the disc.
4.
The total number of tracks and time on the CD will appear on the LCD DISPLAY (#1 ) after a few seconds
Note: The total number of folder and tracks on the MP3 CD will appear on the LCD DISPLAY (# 1).
5.
Tap the
BUTTON (#6)to start to play.
6.
Adjust the /- (#11/12) to obtain the desired sound.
7.
To suspend playing, tap the
BUTTON (#6) again. To resume playing, tap the
BUTTON (#6) again.
8.
You can choose to play your favorite track directly by pressing either the
or
BUTTONS
(#2 or
#3), The LCD Display (#1) will indicate the correct track number selected.
9.
To locate a particular passage within a track, keep the
or
BUTTONS
(#2or #3) depressed until it
