Cooper Wheelock SAFEPATH SP4Z-A-B Скачать руководство пользователя страница 9

P84205 Rev. P  

Sheet 9 of 9

 

 

ANY MATERIAL EXTRAPOLATED FROM THIS DOCUMENT OR FROM COOPER WHEELOCK MANUALS OR OTHER DOCUMENTS 
DESCRIBING THE PRODUCT FOR USE IN PROMOTIONAL OR ADVERTISING CLAIMS, OR FOR ANY OTHER USE, INCLUDING DESCRIPTION 
OF THE PRODUCT'S APPLICATION, OPERATION, INSTALLATION AND TESTING IS USED AT THE SOLE RISK OF THE USER AND COOPER 
WHEELOCK WILL NOT HAVE ANY LIABILITY FOR SUCH USE. 
 

Limited Warranty 

 
Cooper Wheelock, Inc. products must be used within their published specifications and must be PROPERLY specified, applied, installed, operated, maintained, and 
operationally tested in accordance with these instructions at the time of installation and at least twice a year or more often in accordance with local, state and federal 
codes, regulations and laws.  Specification, application, installation, operation, maintenance, and testing must be performed by qualified personnel for proper operation in 
accordance with all of the latest National Fire Protection Association (NFPA), Underwriters' Laboratories (UL), Underwriters’ Laboratories of Canada (ULC), National 
Electrical Code (NEC), Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and other applicable building and fire 
standards, guidelines, regulations, laws and codes including, but not limited to, all appendices and amendments and the requirements of the local authority having 
jurisdiction (AHJ). Cooper Wheelock, Inc. products when properly specified, applied, installed, operated, maintained, and operationally tested as provided above are 
warranted against mechanical and electrical defects for a period of three years from date of manufacture (as determined by date code). Correction of defects by Cooper 
Wheelock, Inc providing repairs or a replacement shall be at Cooper Wheelock, Inc.'s sole discretion and shall constitute fulfillment of all warranty obligations.  The 
foregoing limited warranty shall immediately terminate in the event any part not furnished by Cooper Wheelock, Inc. is installed in the product. The foregoing limited 
warranty specifically excludes any software required for the operation of or included in a product. 

COOPER WHEELOCK, INC. MAKES NO REPRESENTATION 

OR WARRANTY OF ANY OTHER KIND, EXPRESS, IMPLIED OR STATUTORY WHETHER AS TO MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE OR ANY OTHER MATTER. 
 

Users are solely responsible for determining whether a product is suitable for the user's purposes, or whether it will achieve the user's intended results. There is no 
warranty against damage resulting from misapplication, improper specification, abuse, accident, or other operating conditions beyond Cooper Wheelock, Inc.'s control. 
 
Some Cooper Wheelock, Inc. products contain software. With respect to those products, Cooper Wheelock, Inc. does not warranty that the operation of the software will 
be uninterrupted or error-free or that the software will meet any other standard of performance, or that the functions or performance of the software will meet the user's 
requirements. Cooper Wheelock, Inc. shall not be liable for any delays, breakdowns, interruptions, loss, destruction, alteration, or other problems in the use of a product 
arising out of or caused by the software. 
 
The liability of Cooper Wheelock, Inc. arising out of the supplying of a product, or its use, whether based on warranty, negligence, or otherwise, shall not in any case 
exceed the cost of correcting defects as stated in the limited warranty and upon expiration of the warranty period all such liability shall terminate. Cooper Wheelock, Inc. 
is not liable for labor costs incurred in removal, reinstallation, or for damage of any type whatsoever, including but not limited to, loss of profit or incidental or 
consequential damages. The foregoing shall constitute the sole remedy of the purchaser and the exclusive liability of Cooper Wheelock, Inc. 
 
In no case will Cooper Wheelock, Inc.'s liability exceed the purchase price paid for a product. 
 

Limitation of Liability 

 
Cooper Wheelock, Inc.'s liability on any claim of any kind, including negligence, breach of warranty, or otherwise, for any loss or damage resulting from, arising out of, 
or connected with any contract, or from the manufacture, sale, delivery, resale, repair or use of any product shall be limited to the price applicable to the product or part 
thereof which gives rise to the claim.  Cooper Wheelock, Inc.'s liability on any claim of any kind shall cease immediately upon the installation in the product of any part 
not furnished by Cooper Wheelock, Inc. In no event shall Cooper Wheelock, Inc. be liable for any claim of any kind unless it is proven that our product was a direct 
cause of such claim. 

FURTHER, IN NO EVENT, INCLUDING IN THE CASE OF A CLAIM OF NEGLIGENCE, SHALL COOPER WHEELOCK, INC. BE 

LIABLE FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES.

  Some states do not allow the exclusion or limitation of incidental or 

consequential damages, so the preceding limitation may not apply to all purchasers. 
 
 
02/07 

 

 

 

Содержание SAFEPATH SP4Z-A-B










Отзывы: