Cooper Tools Cleco PBA-12, Руководство по эксплуатации и обслуживанию

Страница: 5 / 16

5
A
12 in.
(305 mm)
12 in.
(305 mm)
12 in.
(305 mm)
12 in.
(305 mm)
TORQUE
CAPACITY
10 ft. lbs.
(13.5 Nm)
10 ft. lbs.
(13.5 Nm)
10 ft. lbs.
(13.5 Nm)
10 ft. lbs.
(13.5 Nm)
INSTALLATlON:
NOTE: It is not necessary to disconnect the tool from the Standard Tool Holder to install the swivel tool holder. How-
ever, the air supply should be turned off.
1. Remove manifold pivot pin 204010.
2. Remove manifold tool holder 204022 from the arm.
3. Insert small rectangular block of swivel tool holder (block with threaded hole) into the end of the balance arm.
4. Align threaded hole with pivot pin holes in arm.
5. Insert button head screws through pivot pin holes into threaded hole and tighten.
6. Position manifold tool holder 201690 over large block of swivel tool holder.
7. Align hole in block with pivot pin hole.
8. Reinstall pivot pin.
NOTE: All numbers refer to drawings. When ordering use seven-digit part number from parts list.
SWIVEL TOOL HOLDER FOR BALANCE ARM
204010
SBA WITH STANDARD
TOOL HOLDER SBA WITH SWIVEL
TOOL HOLDER
SBA SWIVEL
TOOL HOLDER
PART NO. 201601
201690
204010
201690
MOUNTING SURFACE
SINGLE ARM
B
C
A
TOOL WEIGHT
CAPACITY
5 lbs.
(2.3 Kg)
5 lbs.
(2.3 Kg)
5 lbs.
(2.3 Kg)
5 lbs.
(2.3 Kg)
C
18 in.
(457 mm)
18 in.
(457 mm)
18 in.
(457 mm)
18 in.
(457 mm)
SPECIFICATIONS
MODEL NO.
SINGLE ARM
SBA-12
SBA-18
PARALLEL ARM
PBA-12
PBA-18
B
12 in.
(305 mm)
18 in.
(457 mm)
12 in.
(305 mm)
18 in.
(457 mm)