6/16
ALLY II UPS™
There are three main components to the ALLY II UPS™ System:
(1) MAIN UNIT ASSEMBLY
Main Unit
• The main unit houses the controls of the ALLY II UPS™.
Power Switch
• The power switch must be ON (green light) in order for the system to work.
Foot Pedal
• Controls the locking and unlocking of the arm.
• Depressing the foot pedal releases the arm to allow for maneuvering the
manipulator.
• Releasing the foot pedal locks the arm and holds the manipulator in the
desired position.
Flexible Arm / Fixed Arm
• Provides desired range-of-motion for positioning the manipulator.
• Holds the manipulator in the desired position.
• Has a mating tip to accommodate engagement with adapter.
• Arm rotates out of the way to provide access between the patient’s legs as needed.
ALLY II UPS™ Blue Handle
• This is what is held onto (as well as the arm) when installing or removing the ALLY II UPS™ from the rail. Refer
to Section 12.2 for more information.
Power Cord
• A detachable power cord is included which supplies power to both the main unit and the foot pedal.
Grounding Post
• To access ground connection.
(2) ALLY II UPS™ RAIL CLAMP
• Used to mount the ALLY II UPS™ to the patient’s right side rail of standard operating
room tables.
• Secure by tightening the knob.
(3) ADAPTER DRAPE
(sold separately) (Part Numbers AU-AD and AU-AD-DLNTR)
•
The adapter drape connects the flexible arm to
CooperSurgical manipulators.
• This component is a single-use disposable and comes
with drape attached.
•
One end of the adapter attaches to the flexible arm via
pinch clips.
• The other end of the adapter securely attaches to the
manipulator using the latching mechanism.
• The ALLY II UPS™’s arm must be completely draped to
ensure that the sterile field is not compromised during
the surgical procedure.
• The AU-AD to be used with RUMI and Advincula Arch.
• The AU-AD-DLNTR to be used with the Advincula Delineator
AU-AD
AU-AD-DLNTR