2
COOPER LIGHTING SOLUTIONS
IB514021EN
Installation instructions
Installation Instructions - Impact Elite LED
INSTALLATION
Tools required
Allen Key (3/16”), Phillips screw driver, electrical wiring
tools.
Applications
●
●
Minimum 90°C Supply Conductors when connections are
made external to the unit
●
●
Rated for 40°C (104°F) ambient
●
●
Suitable for wet location
●
●
Wall mount luminaire only
●
●
Construction is suitable for down mount only
●
●
Must be mounted above grade at minimum four feet or
higher
Mounting (Figure 1.)
1.
Remove the mounting plate from the fixture by
loosening the two set-screws.
2. Remove the protective paper from the supplied
pressure sensitive adhesive backed gasket.
3. Align the gasket to the holes on the mounting plate and
apply pressure to secure to the back of the mounting
plate.
4. Mount the gasket applied mounting plate to the
junction box or wall with the gasket away from the
luminaire and secure to structure. (Figure 1.)
5. Slide the luminaire mounting bracket over the top lid of
the mounting plate.
6. Tighten the two set-screws to secure the luminaire to
the mounting plate.
Wiring (Figure 2.)
1.
The application notes, included within the unit and
instruction sheet indicate the proper minimum supply
wire rating.
2. Supply wiring is accessible within the unit when the
LightSquare mounting plate is removed by unscrewing
four screws.
3. The luminaire comes standard wired for universal
120-277V driver supplied (347V when ordered).
4. Complete the connections per the diagram (Figure 2.)
and the NEC or Canadian standards using approved
methods and devices.
Maintenance
A regular maintenance schedule should be followed to
retain optimal light output and thermal performance. Optical
lens cleaning should be performed with a clean dry cloth to
remove any dust or other contaminants. Additional cleaning
can be performed with non-abrasive acrylic cleanser.
ote:
N
Do not use glass cleaners.
Junction
Box or Wall
Wall
L1 (Supply
L2 (Common
Ground
Gasket on back
Mounting Plate
(Secure to J-Box or Wall)
Mounting
Orientation
Down
(2) Allen
Head Screws
Figure 1.
Figure 2.
