INS #
IL518124ML
Use the provided tool to press and hold the factory reset switch.
Press (2 seconds) and release the switch 4 consecutive times.
Use the provided tool to press and hold the factory reset switch.
Press (2 seconds) and release the switch 4 consecutive times.
Use the provided tool to press and hold the factory reset switch.
Press (2 seconds) and release the switch 4 consecutive times.
Factory Reset
Restauration aux paramètres d’usine
Restablecimiento de fábrica
A. Locate the flush mount low voltage box (Fig 2).
B. Secure the box to an existing junction box (provided by others)
in your wall or;
Trace the outline of the flush mount low voltage box in your
preferred wall location and then cut/remove the section of
the wall to allow for the box to be placed inside the freshly cut
opening.
C. Secure the low voltage box to the wall using the provided
drywall anchors and screws as necessary (2x).
D. Place the motion sensor into the low voltage junction box. The
rubber grips will secure the battery powered motion sensor in
place.
E. Place an appropriate wall plate (provided by others) over top of
the motion sensor and screw it into place.
A. Locate the flush mount low voltage box (Fig 2).
B. Secure the box to an existing junction box (provided by others)
in your wall or;
Trace the outline of the flush mount low voltage box in your
preferred wall location and then cut/remove the section of
the wall to allow for the box to be placed inside the freshly cut
opening.
C. Secure the low voltage box to the wall using the provided
drywall anchors and screws as necessary (2x).
D. Place the motion sensor into the low voltage junction box. The
rubber grips will secure the battery powered motion sensor in
place.
E. Place an appropriate wall plate (provided by others) over top of
the motion sensor and screw it into place.
A. Locate the flush mount low voltage box (Fig 2).
B. Secure the box to an existing junction box (provided by others)
in your wall or;
Trace the outline of the flush mount low voltage box in your
preferred wall location and then cut/remove the section of
the wall to allow for the box to be placed inside the freshly cut
opening.
C. Secure the low voltage box to the wall using the provided
drywall anchors and screws as necessary (2x).
D. Place the motion sensor into the low voltage junction box. The
rubber grips will secure the battery powered motion sensor in
place.
E. Place an appropriate wall plate (provided by others) over top of
the motion sensor and screw it into place.
FLUSH MOUNT METHOD
FLUSH MOUNT METHOD
FLUSH MOUNT METHOD
2
2
2
Rubber Grips
Poignées en
caoutchouc
Puños de goma
Low Voltage
Box
Boîtier basse
tension
Boîtier basse
tension