
Class R2R -
1, 2, or 3 lamp T5/T5HO recessed retrofit
2’x2’ / 2’x4’
INSTALLATION INSTRUCTIONS - page 2 of 2
Corelite 4675 Holly St. Denver, CO 80216 Ph. (303) 393-1522 Fax (303) 393-1477
ADE100076 rev 050410
9. Gently press the reflector up into the housing and against the contoured
brackets at each end. Continue to push the reflector in until it fits into place
above the socket plates and lens holders at each end.
11. Install T5 / T5HO lamps.
10. Secure the reflector by tightening the captive mounting screw at each end.
12. Install the lens by pushing it up into the housing until it snaps into place
around the lens holders at each end.
7. Connect power input to ballast using supplied quick-connectors. Push stripped
wire leads from power input into open end of quick-connector.
8. Begin reflector installation by placing the reflector into the housing.