WARNING
To avoid ignition of the hazardous atmospheres or overheating of the floodlight:
Do not position the floodlight beyond the aiming range limits.
2.
Re-install the back panel and tighten all eight (8) panel mounting screws to 80 in.-lbs.
Figure 3
3.
To make final vertical adjustment, loosen the pivot bolts on the floodlight yoke to position
floodlight at the desired angle (limited to 60 degrees forward and 45 degrees back).
Tighten the two pivot bolts to 45 ft.-lbs.
4.
Rotate the floodlight housing to the desired position.
5.
Turn power on.
Loosen bolts to
set floodlight
angle
MAINTENANCE
•
Perform visual, electrical, and mechanical inspections on a regular basis. The environment
and frequency of use should determine this. However, it is recommended that checks be
made at least once a year. We recommend an Electrical Preventive Maintenance Program as
described in the National Fire Protection Association Bulletin NFPA 70B: Recommended
Practice for Electrical Equipment Maintenance (www.nfpa.org).
•
The lens should be cleaned periodically to ensure continued lighting performance. To clean,
wipe the lens with a clean damp cloth. If this is not sufficient, use a mild soap or a liquid
cleaner such as Collinite NCF or Duco #7. Do not use an abrasive, strong alkaline, or acid
cleaner. Damage may result.
•
Visually check for undue heating evidenced by discoloration of wires or other components,
damaged parts, or leakage evidenced by water or corrosion in the interior. Replace all worn,
damaged, or malfunctioning components and clean gasket seals before putting the luminaire
back into service.
•
Electrically check to make sure that all connections are clean and tight.
•
Mechanically check that all parts are properly assembled.
REPLACEMENT PARTS
Cooper Crouse-Hinds Champ
®
LED Floodlights are designed to provide years of reliable lighting
performance. However, should the need for replacement parts arise, they are available through your
authorized Cooper Crouse-Hinds distributor. Assistance may also be obtained through your local
Cooper Crouse-Hinds representative or the Cooper Crouse-Hinds Sales Service Department, P.O. Box
4999, Syracuse, New York 13221, Phone 866-764-5454.
All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable.
The accuracy or completeness thereof are not guaranteed. In accordance with Cooper Crouse-Hinds "Terms and Conditions of Sale," and
since conditions of use are outside our control, the purchaser should determine the suitability of the product for his intended use and
assumes all risk and liability whatsoever in connection therewith.
IF 1622
Cooper Crouse-Hinds, LLC
Revision 1
PO Box 4999, Syracuse, New York 13221 • U.S.A.
New 04/11
Copyright© 2011, Cooper Industries, Inc.
DIMENSIONS
21.0
532.9
16.0
405.9
6.6
167.1
21.75
552.5
4.75
120.7
Ø .55
14
