Cooper Controls Ltd
International
Usk House,
Lakeside, Cwmbran
Gwent, NP44 3HD, UK
Tel: +44 (0)1633 838088
Fax: +44 (0)1633 867880
Email: [email protected]
North America
203 Cooper Circle
Peachtree City
GA, 30269, USA
Tel: +1-800-553-3879
Fax: +1-800-954-7016
Email: [email protected]
www.coopercontrol.com
Warranty
All products manufactured by Cooper Controls are warranted to be free from defects in
material and workmanship and shall conform to and perform in accordance with Seller’s written
specifications.
For detailed warranty information, visit our website at www.coopercontrol.com
This warranty will be limited to the repair or replacement, at Seller’s discretion, of any such goods
found to be defective, upon their authorized return to Seller. This limited warranty does not apply
if the goods have been damaged by accident, abuse, misuse, modification or misapplication, by
damage during shipment or by improper service.
There are no warranties, which extend beyond the hereinabove-limited warranty, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED
WARRANTY OF FITNESS.
No employee, agent, dealer, or other person is authorized to give any warranties on behalf of the
Seller or to assume for the Seller any other liability in connection with any of its goods except in
writing and signed by the Seller. The Seller makes no representation that the goods comply with
any present or future federal, state or local regulation or ordinance. Compliance is the Buyer’s
responsibility.
The use of the Seller’s goods should be in accordance with the provision of the National Electrical
Code, UL and/or other industry or military standards that are pertinent to the particular end use.
Installation or use not in accordance with these codes and standards could be hazardous.
IM9235 - Split2.8 RDM User Guide Issue 1.0
