24
www.cooperbussmann.com/wirelessresources
Cooper Bussmann 615M-1 Cellular Data Modem and IP Router Series Manual
Rev Version 1.0
Disable PIN (Enter Current PIN)
Select “Yes” to disable the PIN security feature. Select “No” to enable PIN security for the modem. After selecting
No, enter the current PIN in the Current PIN field. Click Save to finish enabling PIN security.
“PIN ACCEPTED” is displayed when the PIN security is enabled.
Action
You may change only one of the following three options at a time. Three choices are
given to Remember, Disable, or Change the PIN security settings.
Remember PIN (Enter Current PIN)
Selecting Yes allows the modem to remember the security PIN, making it unnecessary to enter the PIN each time
the modem tries to connect to the network. Selecting “No” will set the modem to not remember the current PIN,
requiring the user to enter the PIN when requested.
Disable PIN (Enter Current PIN)
Selecting “Yes” will disable the PIN security feature; the current PIN will need to be entered to allow disabling.
Selecting “No” will not disable the PIN security feature.
Change PIN (Enter Current PIN, New PIN, and Confirm PIN)
Selecting “Yes” will allow the user to change the current PIN to a new one. Selecting “No” will not require the user
to change the PIN in the New PIN and Confirm PIN fields. After making changes, click Save to save the settings.
“PIN Entry Required” is displayed when the PIN security is enabled and set not to remember the PIN.
“Unknown” is displayed if the SIM card is not detected.
“SIM Invalid” is displayed if the SIM card is not detected.
PIN
A field is provided for the user to enter the valid PIN. The user has three
opportunities to enter the correct PIN.
Change PIN Status – PIN Entry
Current PIN
Enter the current valid PIN if PIN security is enabled. This field is also used to enable
PIN security after selecting “No” to Disable PIN security.
New PIN
Enter the new PIN (only if PIN security is enabled).
Confirm New PIN
Re-enter the new PIN to confirm it (only if PIN security is enabled).
CDMA Settings
Click the CDMA Settings tab on the Cell Connection page to change CDMA settings. The fields on this page are
only enabled if the Active Carrier supports CDMA. You can choose a specific Band of operation and provision a
new modem.
When a new modem is powered up for the first time, most of the provisioning information is blank or has
information that needs to be changed. The device is usually shipped with the radio ready to be provisioned on a
cellular carrier’s network. Features called Over-The-Air Service Provisioning (OTASP) and Open Mobile Alliance
Device Management (OMA-DM) are supported, which allow the cellular providers to program the modem with
specific information to activate the account.
