CLEAN button
The Clean mode can not be set in the state of power-on; if the air
conditioner ran Cooling and Dry mode before turning off. Press «CLEAN»
button and show « » then the Clean mode is turned on; Press «CLEAN»
button again, « » disappeared, then the Clean mode is turned off, or
running 10 mins in Clean mode then turn off automatically.
In hte first power on, the Clean mode is turned off acquiescent.
The Clean mode can not be set and displayed when the air conditioner was
in auto, Fan and Heat mode before turned off.
Wi-Fi
button
Default WIFI open on remote control , WIFI button for air conditioner
WIFI link.
For detailed information on the settings for the eHome application
please use the following link:
http://cooperandhunter.com/en/wp-content/uploads/2017/11/
WIFI_instruction-HomeEasy.pdf
7
«
+
» and «
-
» button
Press «
+
» or «
-
» button once to increase or decrease 1
0
C of
set temperature.
Holding «
+
» or «
-
» button, set temperature on remote controller will
change quickly. On reseasing button after setting is finished, temperature
indicator on indoor unit will change accordingly. (Temperature can’t be
adjusted under auto mode)
When setting TIMER ON, TIMER OFF or CLOCK, press «
+
» or «
-
» button
to adjust time (Refer to TIMER ON, TIMER OFF buttons).
HEALTH button (Option)
Press this button to turn on or turn off the CH SMART-ION Filter.
SLEEP button
Press this button to turn on or turn off the SLEEP function under cool heat
dry mode.
I FEEL button
Press this button to start I FEEL function and « » will be displayed on
the remote controller. After this function is set, the remote controller will
send the detected ambient temperature to the indoor unit and the unit
will automatically adjust the indoor temperature according to the detected
temperature. Press this button again to close I FEEL function and « »
will disappear.
NOTE:
If there is no this function for units, If press this button,
the main unit will sound, but it also runs under original
status.
NOTE:
This function is off as defaulted after power on.
It will be cleared after changing mode.
It is no use under «FAN» mode and «AUTO» mode.
NOTE:
Please put the removte controller near and confirm the
unit can receive the remote code when this function is
set. Do not put the remote controller near the object of
high temperature or low temperature in order to avoid
detecting inaccurate ambient temperature.
TIMER button
This button can set the time for timer on (timer off). After pressing this
button, “HOUR ON (HOUR OFF)” and “ . “ icon on remote controller blinks.
Press “
+
“
or “
-
“
button withing 5s to set timer on (timer off) time. Each
pressing of “
+
“
or “
-
“
button,
the time will increase or decrease 0.5 hour.
Hold “
+
“
or “
-
“
button, the time will change quickly until reaching your
required time. Press “Timer” to confirm it. The word “HOUR ON (HOUR OFF)”
will stop blinkink. “HOUR ON (HOUR OFF)” and “ . “ on remote controller
will be displayed.
Cancel Timer on(off)
In the condition of timer on (off) is started up, press “Timer” button to cancel
it.
NOTE:
Time set range: 0.5-24 hours.
When timer on has set, the controller displays as
the unit is on.
Timing of the initital set hour is 0.0 hour.
