www.cooperandhunter.com
6
TIMER FUNCTION:
1. In working mode, press the button “ ” and “ ” at the same time
to set automatic off of the product. The LED display will switch to timer
setting, the figures flash on screen, as below:
NOTE:
1. The temperature SET should be higher than
the room temperature, otherwise, the appliance
will not start heating.
2. Once the room temperature achieves the
target temperature, the appliance will stop
automatically, the fan inside will power off 30s
later.
3. If the room temperature is 1°C less than
temperature SET, the appliance will restart.
2. To deactivate timer function press the button “ ” and “ ” at the
same time.
3. The appliance can be set between 1 to 8 hours, increased at 1 hour
intervals.
4. To adjust the timer press “ ” or “ ” buttons then wait a few
seconds for the setting to be memorized.
NOTE:
Figures will keep flashing on the screen until the
program setting is finished
5. After setting finished, screen will automatically show “Temperature” -
“Timer” – “Temperature” in turns within 5 second each.
NOTE:
Timer on screen will decrease at 0.1 hour
intervals, eg: 2.8 hours.
6. When the programmed time is reached, the heater stop working, the
fan inside will power off 30s later.
TI
P-OFF SAFETY DEVICE:
This appliance is provided with a safety device which will switch off the
heater in case of accidental tipping off (90°forward). When the heater
stop working, the fan inside will power off 30s later, the LED display and
indicator light will flash to alert the user to correct the appliance,
meanwhile, the buzzer will beep continuously. The heating is resumed
after the appliance is right up, the LED display and indicator light stop
flashing and the buzzer stops alarming.
NOTE:
The appliance works normally except that it is
tilted 90° forward.
MULTI-ANGLE USE:
This appliance can be use at multiple angles with flexible wind direction,
but the angles shown as picture 5 and 6 are not allowed.
IMPORTANT!
The appliance works properly at the angle of
picture 6, which is forbidden for safety
concerns.