See Website for Full Safety Information
• Do not use in confined space.
• This unit requires 24V DC only 2.7A max.
• All Coomber equipment is covered by a 12 months warranty against
defective components or faulty manufacture from date of dispatch.
• Any modifications to or misuse of the equipment renders this warranty void.
• Equipment that is security marked or damaged cannot,
under any circumstances, be exchanged.
• We reserve the right to change products and specifications without notice.
Power connection
……………………………………………………
Product Instruction Manual
44500
Series
FEED a
CD
printed side up into the slot, the CD can be
CDA format or MP3.
EJECT
- If pressed this will send the disc out.
SPEED
- Turning left enables a slower play speed,
turning right allows a faster play speed. Normal speed is
achieved by turning the control until the centre dent/
notch is felt.
SOURCE
- When the Source key is pressed you can
toggle between the
CD, USB
and
SD CARD READER
.
FOLDER
-When in “stop “mode, select the folder to be
played by scrolling through <<back or >> next folder.
When in the “play” mode, you can skip the track being
played to the next or previous track that is in the folders
list by pressing << or >>.
CAUTION
If no sound is heard;
Check the mute button on the CD, if playing from a CD/
USB/SD Card.
Turn up the master volume & input volume to the
desired level.
Input Mix Levels
……………………………………………………
Connect the1858 external power supply to the
DC in
.
Plug the 1858 to the
mains
supply.
Switch on power to the unit.
Press the on / off button.
The blue LED will be lit when powered .
Playing a CD/USB/SD Card
……………………………………………………
Connecting an iPod or External
audio device
Each
input
has its own volume level, as a starting point set
all to
half volume
then adjust each one to your desired
volume.
E.g. CD volume slightly lower than Microphone so that
your voice can be heard over the music.
Then use the
master volume
to adjust the overall volume
to suit the space and audience.
UHF 1 Models
Rechargeable Models
This unit contains rechargeable batteries
The
LED
lights up when the batteries are charging.
You can
charge and use
the unit at the same time, if the
DC power is unplugged the unit will continue playing.
Please fully charge the batteries before storage.
……………………………………………………
A wireless microphone receiver is built into this unit and
preconfigured ready for use.
The microphone is set on channel 1as a default.
To operate the microphone install a
new battery
then
adjust the
microphone level
and
master volume
on the
unit to mid point.
Switch on the microphone, adjust the
volume
to suit.
……………………………………………………
Using the supplied (Coomber part no 41243) 3.5mm jack
plug lead connect the
headphone output
of the external
device (iPod) to the stereo
Aux in
.
Use the external device to play and adjust the volume
after it is plugged in.
You can use your Coomber to adjust the
volume
.
Remote control & menu features will not control your
external device.