3
Introduction
Thank-you for choosing this quality appliance. It has been designed to provide trouble-free service provided
it is installed and maintained correctly. This cooker is for domestic use only.
Please read these instructions carefully before installing or using your appliance. It is advisable to keep
your purchase and installation receipts with these instructions in a safe place for future reference. Included
is some important safety information, guidelines and recommendations to enable you to safely use your
cooker.
FFD: Flame Failure Device
Please note that this appliance has been fitted with a flame failure device for your added safety and
protection.
What is a Flame Failure Device?
A Flame Failure Device is part of the gas burner system which detects if the flame is extinguished and then
cuts off the gas supply to that burner. This is an additional safety device that has been fitted to your
appliance.
Why is there a Flame Failure Device?
CORGI has issued new regulations to its members, effective from 1st January 2008, stating that all gas
cooking appliances (ovens and hobs) for use in flats and multiple person dwellings cannot be installed
unless they contain a Flame Failure Device.
This appliance has been tested and certified to meet all applicable UK electrical and gas safety standards.
This appliance must only be installed and repaired by a CORGI registered installer or authorised service
personnel. If it is not repaired properly you could be putting yourself and others in danger. It will also
invalidate the guarantee.
Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and
the adjustment conditions are compatible. The factory set adjustment conditions for this appliance are
stated on the rating label.
If you have any questions or need assistance please telephone the Helpline on 0844 871 0011.
When contacting the Helpline please have model number to hand. The model number is shown on the data
label which is visible by opening the oven door.
Unpacking
Carefully remove all the packaging and lift out the cooker and accessories.
Open the oven and remove any tape or packing material used for transit.
Check the appliance for any damage. If it has been damaged do not use it and contact the retailer from
whom the appliance was bought.
Retain the packaging until the cooker has been installed, removing it from the area of installation and
keeping it out of the reach of children.
Dispose of all the packaging in accordance with your local authority guidelines as well as any old appliance
that is being replaced – see “Safe cooker disposal” section.
Before installation
Before any installation work can be carried out a number of requirements must be met.
Make sure that you or your installer are familiar with all the relevant building and fire regulation
requirements before choosing the location of your appliance.
This appliance must be installed in accordance with the instructions to validate the guarantee.
Refer to the “Location” section for minimum clearances and safe placement of your cooker.
