6
6
Electrical Connection
The hob must be properly connected to the mains supply by a qualified electrician according to
current safety regulations.
This appliance must be earthed.
1.
Release the cover by removing the cover screws (Figure 4).
2.
Loosen the cable clamp (Figure 4).
3.
Connect the mains supply cable to the terminal block on the hob using the following colour code
(Figure 5):
•The green or yellow/green (earth) wire should be connected to the corresponding yellow/green wire on
the terminal block or marked E or
E
.
•The blue or black (neutral) wire should be connected to the corresponding blue wire on the terminal
block or marked N.
•The brown or red (live) wire should be connected to the corresponding brown wire on the terminal
block or marked L.
4.
Secure the cable clamp. Check the cable terminals for tightness and ensure that the terminal links are
in place, then close the cover over the terminal block (Figure 4).
Figure 4
Figure 5
CABLE
CLAMP
SCREWS
COVER
COVER
SCREWS
CABLE
CLAMP
MAINS
SUPPLY
LIVE
TERMINAL
EARTH
TERMINAL
NEUTRAL
TERMINAL
E
L
N
